Two motorized linear stages and one motorized rotary stage are combined.
Product details:The product does not include the controller, and the controller is ordered separately.
Precision Motorized Rotary Stage (worm gear): PX110-60
Product features:
※ the stepper motor is equipped with 9-pin interface as standard, which can be automatically controlled by the company's motion controller.
※ the rotating shaft system is precision machined by multi-channel technology, with high matching accuracy, large bearing capacity and long service life.
※ it adopts the worm gear and worm structure with precise research and matching, with comfortable movement, arbitrary forward and reverse rotation and small empty return.
※ the ingeniously designed air return structure can adjust the air return gap caused by long-term use.
※ the special structural design ensures the low end jump and eccentricity of the rotating table, making the rotating motion more stable.
※ the central through hole of the rotary table has strict requirements for coaxiality with the rotary center, and the central aperture of the rotary table has strict matching tolerance limits, which is convenient for customers to make precise positioning.
※ the scale circle on the periphery of the table is a laser marking scale, which can rotate relative to the table to facilitate initial positioning and reading.
※ through the coupling, the motor has high-quality elasticity and small synchronous noise, and the coupling reduces the eccentric transmission performance of the worm.
※ it can form a multi-dimensional electric adjustment table with other types of tables.
※ optional: add limit function, add initial zero position, replace servo motor, install rotary encoder, and accept product restructuring and customization.
※ the three-phase stepping motor or servo motor can be replaced to increase the speed and torque of the rotary table.
Product parameters:
Structure | Model Number | PX110-60 |
Angle range | 360° | |
Platform Size(mm) | φ60mm | |
Transmission Ratio | 45:1 or 90∶1 | |
Drive Mechanism | Worm Gear | |
Travel Guide | Bearing | |
Stepper Motor (1.8°) | 42BYG | |
Main Material | Aluminium Alloy | |
Surface Treatment | Anodizing blackening | |
Central Load | 30kg | |
Weight | 1.2kg | |
Accuracy | Resolution |
0.02°(Non-MS Driver) |
Speed | 50°/sec | |
Repeatability | 0.005°=18″ | |
Absolute Accuracy | 0.01°=36″ | |
Run-Out of Top Plate | 15μ | |
Backlash(μm) | 0.005°=18″ | |
Eccentricity | 5μ | |
Lost Motion | 0.005°=18″ | |
Parallelization | 80μ |
Product dimension drawing:
PX110-60
Precision electric linear Stage (cross roller): PP110 - (30-75)
Product features:
■ the stepper motor is equipped with 9-pin interface as standard, which can be automatically controlled by the company's motion controller.
■ the product structure is small and light, which is suitable for light load, low-speed use and scientific test.
■ high quality fine grinding lead screw drive, small lead, the same fine fraction can achieve high resolution.
■ the ingenious structural design of air elimination check nut can minimize the clearance of grinding lead screw pair.
■ the guide rail adopts cross roller guide rail, which is comfortable to move. It has the function of laterally adjusting the guide rail preload and eliminating clearance, and can be used in multi-dimensional combination.
■ the fine grinding of the bottom plate of the electric moving table and the reasonable fixing mode of the guide rail reduce the pitch and yaw of the electric moving table, and greatly improve the straightness and parallelism of the movement.
■ the stepping motor and grinding screw are connected through high-quality elastic coupling, with synchronous transmission, good depolarization performance, reduced eccentric disturbance and low noise.
■ equipped with hand wheel for easy commissioning.
■ limit switches are installed at both ends to facilitate accurate positioning and protection of products.
■ the base has threaded holes and through holes with standard hole spacing, which is convenient for installation and fixation.
■ optional replacement of servo motor and grating ruler, and accept product restructuring and customization.
Product parameters:
Item Number | PP110-30 | PP110-50 | PP110-75 | ||
Structure | Travel Range | 30mm | 50mm | 75mm | |
Platform | 90mm x 90mm | 90mm x 110mm | 90mm x 110mm | ||
Bearing Construction | Grinding Lead Screw (1mm of leading) | ||||
Travel Guide | Crossed Roller Bearing | ||||
Stepper Motor (1.8°) | 42BYG (Stepping Motor with 2-Phases & 1.8° of Step Angle) | ||||
Material | Aluminum Alloy - Black-Anodized | ||||
Load Capacity | 15kg | 20kg | |||
Weight | 1.25kg | 1.4kg | 1.7kg | ||
Accuracy | Design Resolution | 5μm/Pulse, Non-MS Driver 0.25μm/Pulse, 20MS Driver | |||
Velocity | 10mm/sec | ||||
Repeatability | 5μm | ||||
Absolute Accuracy | 10μm | ||||
Straightness | 8μm | 12μm | |||
Parallelization | 15μm | ||||
Pitching | 25" | ||||
Yawing | 20" | ||||
Backlash | 2μm | ||||
Others | Optional Accessories | Brake Function (-Z), Grating Scales (-G), Servo Motor (-D) | |||
Product dimension drawing:
We have Processing equipment: CNC 10 sets, Lathe 8 sets, milling machine 11 sets. We have a group of experienced high-level processing technicians. Our products are sent to the Metrology Institute for random inspection every year regularly and issue inspection report.
Have the industry leading level of the designer, can strictly grasp the product design and processing precision.
We have experienced and skilled assembly master.
Our products from the design concept, the processing technology, the assembly technology omni-directional control.Provide high quality products for users.
If our standard products do not meet your requirements, we can customize them according to your requirements.
We are glad that you can cooperate with us.As the journey is far away, please be sure to see the parameters or communicate with our sales when selecting the product, Avoid buying wrong products to delay your use.
